Issued: 2016-06-06
The SEAS Electric Power System Vocabulary defines: 1. Electric power systems that consume, produce, or store electricity, 2. electrical connections between electric power systems, where electricity is exchanged, and 3. electrical connection Points of electric power systems, through which electricity flows in/out the power systems.
IRI: https://w3id.org/seas/AlternatingCurrentConnection
The class of electrical power connections through which energy flows using alternating current.
sub class of: ElectricalConnection
IRI: https://w3id.org/seas/AlternatingCurrentConnectionPoint
The class of electrical power connection points through which energy flows using alternating current.
IRI: https://w3id.org/seas/DirectCurrentConnection
The class of electrical connections through which energy flows using direct current.
IRI: https://w3id.org/seas/DirectCurrentConnectionPoint
The class of electrical connection points through which energy flows using direct current.
IRI: https://w3id.org/seas/ElectricPowerConsumer
An electric power consumer is an electric power system that is capable of consuming electricity.
IRI: https://w3id.org/seas/ElectricPowerLine
An electric power line is an electric transmission system that is capable of transmitting electricity on a certain distance within an electric power network.
An electric power line must be connected to two power connections, although this requirement cannot be modeled using OWL axioms if we want to remain in a decidable fragment.
IRI: https://w3id.org/seas/ElectricPowerProducer
An electric power producer is an electric power system that is capable of producing electricity.
IRI: https://w3id.org/seas/ElectricPowerStorageSystem
an electric power storage system is an electric power system that is capable of storing electricity. Usually a battery, an electric vehicle, or a microgrid
IRI: https://w3id.org/seas/ElectricPowerSystem
The class of electric power systems, i.e., systems that exchange electricity (i.e., electric power) with other systems.
Electric power systems may consume, produce, or store electricity. Such systems are defined by subclasses of electric power system. Electric power systems that dissipate energy are thermodynamic systems (i.e., they can then dissipate heat).
Electric power systems can exchange electricity with other electric power systems. These exchange are only possible through electrical connections between electric power systems.
Electric power systems can have sub power systems:
sub class of: System, ThermodynamicSystem
IRI: https://w3id.org/seas/ElectricPowerTransformer
An electric power transformer is an electric power system that is capable of transforming electricity within a power network, between a primary connection point and a secondary connection point.
IRI: https://w3id.org/seas/ElectricPowerTransmissionSystem
An electric power transmission system is an electric power system that is capable of transmitting electricity. Usually to transmit electricity on a certain distance within an electric power network, or to transform it.
IRI: https://w3id.org/seas/ElectricalConnection
The class of electrical connections between electric power systems. an electrical connection describes potential electricity flows between the electric power systems it connects. For example, the following RDF graph states that a power bus connects two power lines and a transformer:
<power_bus> a seas:ElectricalConnection ;
seas:connectsSystem <power_line_1> , <transformer> , <power_line_2> .
Only electric power systems and electrical connection points are connected through an electrical connection. A connection between electric power systems is not necessarily an electrical connection.
Any electric power system that exchanges electricity through an electrical connection is connected at least through one of its power connection points to the electrical connection: if:
<power_system> a seas:ElectricPowerSystem . <power_connection> a seas:ElectricalConnection . <power_system> seas:connectedThrough <power_connection> .
then there exists _:powerConnectionPoint such that:
_:powerConnectionPoint a seas:ElectricalConnectionPoint ;
seas:connectionPointOf <power-system> ;
seas:connectsSystemThrough <power_connection> .
IRI: https://w3id.org/seas/ElectricalConnectionPoint
The class of electrical connection points of electric power systems, at which they may be electricaly connected to other systems. For example, an electric vehicle service equipment may have three electric power connection points: two different kinds of plugs that enable to charge electric vehicles, and a three phase power bus connection point to the grid:
<electric_vehicle> a seas:ElectricPowerSystem ;
seas:connectsAt <plug_high_voltage> , <normal_plug> , <three_phase_connection_point> .
<plug_high_voltage> a seas:ElectricalConnectionPoint .
<normal_plug> a seas:ElectricalConnectionPoint .
<three_phase_connection_point> a seas:ElectricalConnectionPoint .
Any system connected through an electrical connection is connected at one of its electrical connection points to the electrical connection: if:
<system> a seas:System . <system> seas:connectedThrough <connection> . <connection> a seas:ElectricalConnection .
then there exists _:connectionPoint such that:
_:connectionPoint a seas:ElectricalConnection Point ;
seas:connectionPointOf <system> ;
seas:connectsSystemAt <connection> .
An electrical connection point describes an electric signal, and the electricity that enters/leaves the electric power system. An electrical connection point only belongs to an electric power system, and connects it through electrical connections. A connection point of an electric power system is not necessarily an electrical connection.
IRI: https://w3id.org/seas/ExtraHighVoltage
The voltage is Extra-High according to IEC 60038.
IRI: https://w3id.org/seas/ExtraHighVoltageEvaluation
The voltage is Extra-High according to IEC 60038.
IRI: https://w3id.org/seas/ExtraLowVoltage
The voltage is Extra-Low according to IEC 60038.
IRI: https://w3id.org/seas/ExtraLowVoltageEvaluation
The voltage is Extra-Low according to IEC 60038.
IRI: https://w3id.org/seas/HighVoltage
The voltage is High according to IEC 60038.
IRI: https://w3id.org/seas/HighVoltageEvaluation
The voltage is High according to IEC 60038.
IRI: https://w3id.org/seas/LowVoltage
The voltage is Low according to IEC 60038.
IRI: https://w3id.org/seas/LowVoltageEvaluation
The voltage is Low according to IEC 60038.
IRI: https://w3id.org/seas/MediumVoltage
The voltage is Medium according to IEC 60038.
IRI: https://w3id.org/seas/MediumVoltageEvaluation
The voltage is Medium according to IEC 60038.
IRI: https://w3id.org/seas/Power
This code list enables to interpret the given power value.
IRI: https://w3id.org/seas/SinglePhaseConnectionPoint
A single phase connection point is a connection point composed of two wires (plus the protective earth):
sub class of: AlternatingCurrentConnectionPoint
IRI: https://w3id.org/seas/SinglePhasePowerBus
A single phase power bus is a connection composed of two wires (plus the protective earth): wire for the phase; wire for the neutral.
IRI: https://w3id.org/seas/SplitPhaseConnectionPoint
The class of power connection points through which energy flows using split-phase alternating current.
IRI: https://w3id.org/seas/SplitPhasePowerBus
A split-phase power bus is a connection composed of three wires (plus the protective earth):
IRI: https://w3id.org/seas/ThreePhaseConnectionPoint
A three phase connection point is a connection point composed of four wires (plus the protective earth): - wires R, S, T, for the phases; - wire N for the neutral.
IRI: https://w3id.org/seas/ThreePhasePowerBus
A three phase power bus is a connection composed of four wires (plus the protective earth): wires R, S, T, for the phases; wire N for the neutral.
IRI: https://w3id.org/seas/ThreeWireDirectCurrentConnectionPoint
A three wire direct current power connection point is a connection point composed of three wires (potentialy plus the protective earth):
IRI: https://w3id.org/seas/ThreeWireDirectCurrentPowerBus
A three wire direct current power bus is a connection composed of three wires (potentialy plus the protective earth): wire for the positive; wire for the mid-wire; wire for the negative.
IRI: https://w3id.org/seas/Tp - sub class of: http://www.w3.org/2004/02/skos/core#Concept - known instances: tp-N, tp-R , tp-RN , tp-RS , tp-S , tp-SN , tp-ST , tp-T , tp-TN , tp-TR
IRI: https://w3id.org/seas/TwoWireDirectCurrentConnectionPoint
A two wire direct current connection point is a connection point composed of two wires (potentialy plus the protective earth): wire for the positive; wire for the negative.
IRI: https://w3id.org/seas/TwoWireDirectCurrentPowerBus
A two wire direct current power bus is a connection composed of two wires (potentialy plus the protective earth): wire for the positive; wire for the negative.
IRI: https://w3id.org/seas/VoltageEvaluation
The class of voltage signal evaluations.
IRI: https://w3id.org/seas/VoltageProperty
The class of voltage signals.
range of: tapChanger, voltage
IRI: https://w3id.org/seas/connectedInHot1Hot2Through
Links an electric power system to a split-phase power bus connection with which it is connected with a hot1-to-hot2 configuration.
range: SplitPhasePowerBus
IRI: https://w3id.org/seas/connectedInHot1NThrough
Links an electric power system to a split-phase power bus connection with which it is connected with a hot1-to-N configuration.
IRI: https://w3id.org/seas/connectedInHot2Hot1Through
Links an electric power system to a split-phase power bus connection with which it is connected with a hot2-to-hot1 configuration.
IRI: https://w3id.org/seas/connectedInHot2NThrough
Links an electric power system to a split-phase power bus connection with which it is connected with a hot2-to-N configuration.
IRI: https://w3id.org/seas/connectedInRNThrough
Links an electric power system to a three phase power bus connection with which it is connected with a RN configuration.
IRI: https://w3id.org/seas/connectedInSNThrough
Links an electric power system to a three phase power bus connection with which it is connected with a SN configuration.
IRI: https://w3id.org/seas/connectedInStarThrough
Links an electric power system to a three phase power bus connection with which it is connected with a star configuration.
IRI: https://w3id.org/seas/connectedInTNThrough
Links an electric power system to a three phase power bus connection with which it is connected with a TN configuration.
IRI: https://w3id.org/seas/connectedInTriangleThrough
Links an electric power system to a three phase power bus connection with which it is connected with a triangle configuration.
IRI: https://w3id.org/seas/connectsPrimarilyAt
Links an electric power transformer to its primary connection point
IRI: https://w3id.org/seas/connectsSecondarilyAt
Links an electric power transformer to its secondary connection point
IRI: https://w3id.org/seas/connectsSystemInHot1Hot2
Links a split-phase power bus to one of the electric power systems it connects with a hot1-to-hot2 configuration.
IRI: https://w3id.org/seas/connectsSystemInHot1N
Links a split-phase power bus to one of the electric power systems it connects with a hot1-to-N configuration.
IRI: https://w3id.org/seas/connectsSystemInHot2Hot1
Links a split-phase power bus to one of the electric power systems it connects with a hot2-to-hot1 configuration.
IRI: https://w3id.org/seas/connectsSystemInHot2N
Links a split-phase power bus to one of the electric power systems it connects with a hot2-to-N configuration.
IRI: https://w3id.org/seas/connectsSystemInRN
Links a three phase power bus to one of the electric power systems it connects with a RN configuration.
IRI: https://w3id.org/seas/connectsSystemInRNAt
Links a three phase power bus to one of the single phase connection points it connects with a RN configuration.
IRI: https://w3id.org/seas/connectsSystemInRNThrough
Links a single phase connection point to a three phase power bus connection with which it is connected with a RN configuration.
IRI: https://w3id.org/seas/connectsSystemInSN
Links a three phase power bus to one of the electric power systems it connects with a SN configuration.
IRI: https://w3id.org/seas/connectsSystemInSNAt
Links a three phase power bus to one of the single phase connection points it connects with a SN configuration.
IRI: https://w3id.org/seas/connectsSystemInSNThrough
Links a single phase connection point to a three phase power bus connection with which it is connected with a SN configuration.
IRI: https://w3id.org/seas/connectsSystemInStar
Links a three phase power bus to one of the electric power systems it connects with a star configuration.
IRI: https://w3id.org/seas/connectsSystemInStarAt
Links a three phase power bus to one of the three phase connection points it connects with a star configuration.
IRI: https://w3id.org/seas/connectsSystemInStarThrough
Links a three phase connection point to a three phase power bus connection with which it is connected with a star configuration.
IRI: https://w3id.org/seas/connectsSystemInTN
Links a three phase power bus to one of the electric power systems it connects with a TN configuration.
IRI: https://w3id.org/seas/connectsSystemInTNAt
Links a three phase power bus to one of the single phase connection points it connects with a TN configuration.
IRI: https://w3id.org/seas/connectsSystemInTNThrough
Links a single phase connection point to a three phase power bus connection with which it is connected with a TN configuration.
IRI: https://w3id.org/seas/connectsSystemInTriangle
Links a three phase power bus to one of the electric power systems it connects with a triangle configuration.
IRI: https://w3id.org/seas/connectsSystemInTriangleAt
Links a three phase power bus to one of the three phase connection points it connects with a triangle configuration.
IRI: https://w3id.org/seas/connectsSystemInTriangleThrough
Links a three phase connection point to a three phase power bus connection with which it is connected with a triangle configuration.
IRI: https://w3id.org/seas/consumedElectricPower
Consumed Electric Power is the electric power that is consumed by the electric power system, usually a load, a battery, or a microgrid.
IRI: https://w3id.org/seas/current
Current is the voltage at some electrical connection point.
IRI: https://w3id.org/seas/electricPowerBalance
Electric power balance is the difference between the incoming electric power and the outgoing electric power.
IRI: https://w3id.org/seas/exchangesElectricityWith
Links an electric power system to another electric power system it exchanges electricity with.
This property can be qualified using class seas:ElectricalConnection, which connects (at least) the two electric power systems. For example, for the electricity to flow between a battery and a light, then they must share an electrical connection:
<battery> a seas:ElectricPowerSystem . <light> a seas:ElectricPowerSystem . <battery> seas:exchangesElectricityWith <light> .
If there is an electrical connection between several electric power systems, then one may infer these electric power systems can exchange electricity.
IRI: https://w3id.org/seas/impedance
The electrical power line impedance/reactance.
IRI: https://w3id.org/seas/incomingElectricPower
Incoming electric power is: (a) the sum of the electric power that enter the system from the exterior, or (b) the electric power that enters the system through this connection point.
IRI: https://w3id.org/seas/outgoingElectricPower
Outgoing electric power is: (a) the sum of the electric power that leaves the system from the exterior, or (b) the electric power that leaves the system through this connection point.
IRI: https://w3id.org/seas/primarilyConnectedThrough
Links an electric power transformer to its primary connection
IRI: https://w3id.org/seas/producedElectricPower
Produced Electric Power is the electric power that is produced by the electric power system, usually a generator, a battery, or a microgrid.
IRI: https://w3id.org/seas/resistance
The electrical power line resistance.
IRI: https://w3id.org/seas/secondarilyConnectedThrough
Links an electric power transformer to its secondary connection
IRI: https://w3id.org/seas/storageElectricPower
Storage Electric Power is the electric power that is stored by the electric power system, usually a battery, or a microgrid.
IRI: https://w3id.org/seas/subElectricPowerSystemOf
Links an electric power system to its super electric power systems. The electricity of a sub power system contributes to the electricity of its super electric power system. For example,
domain: ElectricPowerSystem
IRI: https://w3id.org/seas/susceptance
The electrical power line susceptance.
IRI: https://w3id.org/seas/tapChanger
The Tap changer to change the voltage regulation of the transformer.
IRI: https://w3id.org/seas/voltage
Voltage is the voltage at some electrical connection, or at some electrical connection point.
range: VoltageProperty
IRI:https://w3id.org/seas/power
This code list enables to interpret the given electric power value.
IRI:https://w3id.org/seas/power-Active-Power
Active Power means that the given value measures the active power of the electric signal, in (W).
IRI:https://w3id.org/seas/power-Apparent-Power
Apparent Power means that the given value measures the apparent power of the electric signal, in (VA).
IRI:https://w3id.org/seas/power-Imported-Active-Energy
Imported Active Energy means that the given value measures the imported active energy, often in Wh/10.
IRI:https://w3id.org/seas/power-Power-Factor
Power Factor means that the given value measures the cosinus of the voltage with respect to current, unitless.
IRI:https://w3id.org/seas/power-Reactive-Power
Reactive Power means that the given value measures the reactive power of the electric signal, in (var).
This code list enables to interpret the given value with respect to the connections in three phase.